Тестер за LAN Lanberg NT-0404
1,190.00 den
- Test the correct pin configuration of 10Base-T, 10Base-2 Ethernet cable, RJ45/RJ11 modular cables, 258A, TIA 568A/568B and Token Ring Cable etc.
ШИФРА: 421590
Технички спецификации:
- Test the correct pin configuration of 10Base-T, 10Base-2 Ethernet cable, RJ45/RJ11 modular cables, 258A, TIA 568A/568B and Token Ring Cable etc.
- Easy to read cable status and verify cable continuity, open short and miswire.
- With remote kit, it can remotely test cable far away either on wall plate or patch panel.
- Test the grounding
- With auto or manual scan
- Operates with 9 Volt block battery (not included)
RELATED PRODUCTS
-
Дигитален Мултиметар Mastech MS8268
2,590.00 den
Add to cart- AC/DC 1000V/10A 200KHz 200uF 40Mohm Relative Measurement hFE Diode Check Continuity
- LED / Sound Warning when incorrect banana jacks are used relative to function switch setting
- Auto and Manual Ranging with Relative measurement (all ranges except frequency)
- All range fused (resettable) with 1 Year Warranty
- Auto power off (could be disabled) & Blue LED Back-lit LCD display
-
Дигитална Ампер Клeшта Mastech MS2115A
4,990.00 den
Add to cart- DC Voltage: 60mV/600mV/6V/60V/600V ±(0.7% +3); 1000V ±(0.8% +2);
- AC Voltage: 60mV/600mV/6V/60V/600V ±(0.8% +3); 750V ±(1% +4);
- DC Current: 60A/600A/1000A ±(2.5% +6); 60A/600A/1000A ±(2.5% +6)
- Resistance: 600Ω/6kΩ/60kΩ/600kΩ/6MΩ ±(0.8% +3); 60MΩ ±(1.2% +3);
- Capacitance: 10nF/100nF/1000nF/10µF/100µF/1000µF/10mF/100mF ±(4.0% +5);
- Frequency (From Clamp): 0~ 10KHz ±(1.5% +5);
-
Дигитален Мултиметар Mastech MS8250D
5,490.00 den
Add to cart- DC voltage: 400m/4V/40V/400V ± 0.7%, 1000V ± 0.8%
- AC voltage: 400mV ± 3.0%, 4V/40V/400V ± 0.8%, 750V ± 1.0%
- Resistance: 400/4k/40k/400k/4MΩ ± 1.0%, 40MΩ ± 2.0%
- DC current: 400μA/4000μA/40mA/400mA ± 1.5%,10A ± 2.0%
- AC current: 400μA/4000μA/40mA/400mA ± 1.5%,10A ± 3.0%
- Capacitance: 20n/200n/2μ/20μF ± 4.0%
- Frequency: 10/100/1000/10k/200kHz ± 2.0%
- Transistor hFE: 1 ~ 1000
- Continuity test
- Diode test
- Duty Cycle Measurement
- Relative value measurement
- Sampling Rate: approx. 3 times / second
- Test Leads: 1KV 10A
- Safety Standards: IEC1010-1, CAT. III 600V & CAT. II 1000V
- Operating Temperature: 0 ~ 40° C (32 ~ 104° F)
- Operating Humidity: below 80% RH, <10° C non-condensing
- Storage Temperature: -10 ~ 60° C (14~ 140° F)
- Storage Humidity: below 80% RH
- Power: 3 x 1.5V AAA batteries (Not included)
- Dimensions: 195 mm x 92 mm x 55mm (7.68′ X 3.62′ X 2.17′ inch)
- Weight: Approx.380g (13.40oz)
Reviews
There are no reviews yet.